1U to 100U
Any height you like. A rack can never shrink below its highest device; you get a heads up instead of devices falling off the end.
A rack planner inside one offline HTML file. Any size from 1U to 100U, the front and rear side by side, full depth servers, 0U side rails and connections that leave the rack the way your cables do.
Pick a standard size or choose Custom size when you add a rack or in its side panel. Great for 20U racks, 8U 10 inch mini racks, 3D (beta) printed racks and the classic LACK rack.
Any height you like. A rack can never shrink below its highest device; you get a heads up instead of devices falling off the end.
Mount devices on the front or the rear, or mark them full depth so they use both faces. The side by side view shows both at once.
Vertical PDUs and other side rail devices sit beside the rack and never use up rack units.
Number units top down or bottom up, per rack, to match the printing on your rails.
Rack Unit and U Height check what you type. No more devices stacked on each other or hanging off the end. New devices drop into the lowest free slot and keep their connections.
Export any rack elevation as CSV or print it for the data center door.
Connections to racked devices are finally drawn. On the map they come out of the rack itself. In rack view every connection leaving the rack gets a labelled stub, so you can see that the patch panel feeds the office desk and the access points without leaving the view.
Open Rack View from the side panel, or select a rack and press Enter. Deleting a rack with the Delete key takes its devices with it, so no invisible ghost devices are left behind.
A tour of the homelab demo: the network map, the rack room, the side by side rack view and the smart home tab.
In TheOneFile_Verse every rack becomes a real 3D (beta) cabinet with its devices mounted at the right units, front, rear and side rail. The 3D (beta) edit book takes any rack size, with rack, U position, U height, face and mounting fields and the same checks as 2D.
Walk TheOneFile_VerseYes. Choose Custom size and set any height from 1U to 100U. The homelab demo includes an 8U 10 inch mini rack numbered from the top like printed rails.
Mark a device as full depth and it occupies its units on both the front and the rear. The side by side view shows it on both faces.
Yes. Export the elevation as CSV or print it, or share the whole file. It is one HTML file, so they only need a browser.
Yes. Racks are in every edition, including Core.